Bayanin samfur:

Gabatar da busassun turmi hadawa inji

Busassun busassun injin turmi, wanda kuma aka sani da turmi da aka rigaya, ana yin shi a cikin masana'anta ta daidaitattun sinadarai, ana hadawa daidai gwargwado, wurin ginin kawai ana iya amfani da ruwa kai tsaye.Ko da yake ana ƙara abubuwa daban-daban, suna da kaddarorin daban-daban. Idan aka kwatanta da turmi da aka samar a wurin, buƙatun busasshen turmi yana ƙaruwa da sauri saboda fitattun fa'idodinsa.

Bidiyo:

Siffofin busassun turmi hadawa inji

1) Ƙananan zuba jari, mafi dacewa ga daidaikun mutane.

2) Yankin yana da ƙananan, kuma ana iya gina masana'antu a cikin gidaje na yau da kullum.

3) Aikin yana da sauƙi, kuma mutane 2-3 za su iya kammala shi. .

4) Sakamakon yana da girma, fitarwa shine gabaɗaya 3-4T / H, yana kaiwa 20-25T / rana.

5) Sauƙi don aiki da kulawa.

Aikace-aikace na bushe turmi hadawa inji

1) busasshen turmi

2) Turmi mai rufi

3) foda mai sanyawa

4) Turmi mason

5) Turmi bango siriri kuma santsi

6) Turmi mai hana ruwa

7) gypsum foda

8) Turmi plastering bango

9) Turmi tile bonding turmi

BABBAN GIRMA

Screw Conveyor tare da Ciyarwa Hopper da Karkataccen Ribbon Mixer:

Mai ɗaukar dunƙule na Φ165X3500mm, kayan ciyarwa zuwa mahaɗin. Na waje da na ciki dunƙule kintinkiri ruwa kore da high gudun juyi shaft, hadawa abu a cikin matsakaicin, ciki dunƙule ribbon ruwa tilasta abu zuwa bangarorin, waje dunƙule kintinkiri ruwa tilasta bangarorin abu zuwa ciki, Mix kayan baya da baya. A lokaci guda kuma, wasu kayan da ribbon ɗin ke motsawa suna yin motsi na radial, don samar da haɗin kai, don cimma tasirin haɗuwa iri ɗaya cikin ɗan gajeren lokaci. Lokacin hadawa: 10-15min / tsari

Mai Isar Screw:

Ana canza turmi mai haɗawa daga mahaɗa zuwa gama kwandon samfur. Ƙirar jiki mai karkace tare da ƙananan diamita, babban saurin jujjuyawa da farar canji yana tabbatar da santsi, sauri da abinci iri ɗaya na samfurin a cikin tsarin aiki. Lubrication da hatimi abin dogaro ne kuma babu zubewa. Babu ɓata kayan aiki tare da kyakkyawan yanayin aiki.

Adana silo:

Silo ɗin ajiya na 1.5m³, adana kayan da aka gama kuma a shirya don injin tattara kaya, wanda ke haɓaka inganci sosai.

Injin shiryawa:

Bawul nau'in atomatik bushe turmi shuka. 15-50kg / jaka daidaitacce, da shiryawa gudun ne 5-6s / jaka. Gudun tattarawa da sauri, daidaiton ma'auni mai girma, babban matakin sarrafa kansa, da aiki mai sauƙi.

Air Compressor:

daidaita matsi na iska, samar da tushen iska don na'ura mai ɗaukar kaya don tattarawa da sauri da karyewar baka na gamawar hopper.

Hotunan samfur:

Ayyuka sun nuna

Tuntuɓar:

Mr.Yark

[email protected]

Whatsapp: +8618020515386

Mr. Alex

[email protected] 

Whatapp:+8613382200234