Horizontal Continuous Band Sealer Machine Plastic Film Bags Heat Sealing Machine

Short Description:


Product Detail

Contact us

FAQ

Product Tags

Automatic horizontal plastic film bags heat sealing machine continuous band sealer machine

Automatic continuous heat sealing machine can heat and seal thick PE or PP plastic bags with high quality, high efficiency and continuity, as well as paper plastic composite bags and aluminum plastic composite bags; it is widely used in chemical , pharmaceutical , grain, feed and food industries.

 

Technical parameter

Model DCS-32
Supply voltage(V/Hz) Three phase(3PH)AC 380/50
Total power (KW) 4
Transmission power (KW) 0.75
Electric heating power (KW) 0.5×6
Sealing speed (M / min) 0-12
Plastic bag material (mm) Polyethylene (PE) ,polypropylene (PP) film
Total thickness of plastic bag (mm) ≤1.0
Sealing width (mm) 10
Distance from sealing center to ground (m) 750-1450
Temperature control range (℃) 0-300
Air supply pressure (Mpa) 0.6
Cooling mode wind cooling
Overall dimension (L) × W × H)(mm) 2830×950×1800
Net weight (kg) 320

  • Previous:
  • Next:

  • Mr.Yark  

    [email protected]

    Whatsapp: +8618020515386

     Mr.Alex  

    [email protected] 

    Whatsapp:+8613382200234

  • Write your message here and send it to us

    Related products

    • Large inclination belt conveyor

      Large inclination belt conveyor

      Large inclination belt conveyor is a new type of continuous conveying equipment, which has the characteristics of large conveying capacity, strong versatility, and wide range of use. Contact:  Mr.Yark   [email protected]  Whatsapp: +8618020515386  Mr.Alex   [email protected]  Whatapp:+8613382200234

    • Industrial Filter Cartridge Dust Collector Equipment Dust Removal System

      Industrial Filter Cartridge Dust Collector Equi...

      Brief Introduction The dust collector can effectively reduce the dust content at the production site through the dust and gas isolation method, and can effectively increase the service life of the bag or filter cartridge through the pulse valve ,thereby reducing the maintenance cost. Advantages 1. It is suitable for dust with high purification density and particle size greater than 5 m, but not for dust with strong adhesion; 2. No moving parts, easy to manage and maintain; 3. Small volume, si...

    • Automatic pallet library

      Automatic pallet library

      The automatic pallet library is mainly composed of pallet library and conveyors. It is mainly used at the end of the palletizing production line , in cooperation with the palletizing robot, to improve the overall automation level of the workshop, effectively improve the production efficiency, and reduce the labor intensity of workers. Contact:  Mr.Yark   [email protected]  Whatsapp: +8618020515386  Mr.Alex   [email protected]  Whatapp:+8613382200234

    • Metal detector

      Metal detector

      Metal detector is suitable for the detection of all kinds of metal impurities in food, chemical, plastic, medicine and other industries.   Contact:  Mr.Yark   [email protected]  Whatsapp: +8618020515386  Mr.Alex   [email protected]  Whatapp:+8613382200234

    • Sewing Machine Conveyor Automatic Bag Closing Conveyor

      Sewing Machine Conveyor Automatic Bag Closing C...

      Product introduction: The units have been supplied for either 110 volt/single phase, 220 volt/single phase, 220 volt/3 phase, 380/3 phase, or 480/3 phase power. The conveyor system has been set up for either a one person operation or a two person operation according to the purchase order specifications. Both operating procedures are detailed as follows: ONE PERSON OPERATIONAL PROCEDURE This conveyor system is designed to work with a gross weigh bagging scale and is designed to close 4 bags pe...

    • Stainless Steel Auger Screw Feeder Machine Conveyor Chicken Feed Cement Mixing

      Stainless Steel Auger Screw Feeder Machine Conv...

      Brief introduction The Screw Conveyor system is highly versatile. They are manufactured from stainless steel with surface finishing grade suitable for the application. Fabrication of the troughs is carried out on machines ensuring perfectly smooth surfaces which is why material residue is reduced to the minimum. The Screw Conveyors are made up of a U or V-shaped trough equipped with at least one outlet spout, an end plate at each trough end, helicoid screw flighting welded on a centre pipe wi...